Durch die Nutzung dieser Website erklären Sie sich damit einverstanden, dass unsere Dienste Cookies verwenden. Mehr erfahren

Maintenance free heavy-duty Rod Ends with male thread and threaded bolts - DIN/ISO 12240-N

Productseries SMCP..W

Universal application at high constant loads and low alternating and shock loads in axial and radial directions. For difficult lubrication conditions, high running speeds and large swings. Vmax = 60 m/min.

Product specification ..W

All series of rod ends and spherical bearings, except thesealed ..2 RS design, can be fitted with threaded bolts and used as angle joints. The bolt is pressed and riveted into the inner ring.

Material: Stainless steel, material 1.4305, hexagon bare.
Other materials such as 1.7225 browned. Special dimensions on request.

Tabelle zu Gelenkköpfe: Serie SMCP mit Gewindebolzen

Series SMCP

Friction pairing: Steel/PTFE bronze fabric.
Outer part: Up to size 14 free-cutting steel 1.0718, from size 16 material 1.0501, galvanized and chromalized to DIN 50961.
Bushings: Cu Sn 8/Cu Zn 40 Al 2 F59 galvanized, lined with permanently affixed sliding foil, consisting of PTFE with a bronze supporting fabric.
Inner ring: Roller bearing steel 1.3505, hardened, ground and polished.

Series SMXCP (high-strength)

Available from size 5
Friction pairing: As SMCP
Outer part: Material 1.7225 tempered or similar, galvanized and chromalized to DIN 50961.
Bushings: As for SMCP..
Inner ring: As for SMCP..

Series SMRCP (rustproof)

Available from size 3
Outer part: Stainless steel 1.4305, from size 16 forged.
Bushings: As for SMCP.., if required stainless steel.
Inner ring: As for SMCP.. but hard-chromed; if required stainless steel.

Bearing slackness

Depending on size, between 0.002 and 0.020 mm radially.

Tabelle zu Gelenkköpfe: Serie SMCP




  • Stainless inner ring:
    Order designation: SMCP xx IH
  • Hard-chromed inner ring:
    Order designation: SMCP xx IR
  • Hard-chromed outer part and inner ring:
    Order designation: SMCP xx H

Sealed design

Gelenkköpfe in den Größen 8 - 30 können mit austauschbaren Dichtmanschetten geliefert werden.
Series SMCP: Sealed design
Specification sealing (..2RS)

Threaded bolts for Rod Ends

Sämtliche Gelenkköpfe können mit Gewindebolzen ausgerüstet und als Winkelgelenk eingesetzt werden.
Series SMCP: threaded bolts
Specification threaded bolts (..W)
to the top